Program Execution Using Debugger; Standalone Program Execution - Fujitsu FM3 family User Manual

4.1.3 Program Execution Using Debugger

When the debugger is activated, the screen appears as shown in Figure 15. Press
"Execute" to start executing the program.
For other debugger operations, see help.
4.2

Standalone Program Execution

When the program is exported and debugging is completed by the procedure given in "4.1
Program Execution Using Debugger," turn the board's power off with the power switch and
remove ICE from the simple AV system board.
After doing so, the program is run by standalone by turning the power on with the power
switch on the simple AV system board.
Execute
Figure 15 Screen When Debugger is Activated
18
AN706-00040-2v0-E