Table of Contents
Advertisement
4.5.2
PCIPnP
Plug & Play O/S
Primary Display Adapter
Plug & Play O/S [No]
When set to [No], the BIOS configures all the devices in the system. When set to
[Yes] and if you install a Plug and Play operating system, the operating system
configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
Primary Display Adapter [PCI]
Allows you to select the graphics controller to use as the primary boot device.
Configuration options: [PCI] [PCI��]
4.5.3
Onboard Device Configuration
IDE Function Setup
Serial-ATA Configuration
HD Audio
Front Panel Support Type
Onboard 1st nVidia LAN
Onboard 2nd nVidia LAN
Onboard LAN Boot ROM
Onboard 1394
LCD Poster Off
LCD Poster Backlight
LCD Poster Mode
x
LCD Poster String
F1:Help
ESC: Exit
4-30
Phoenix-AwardBIOS CMOS Setup Utility
Advanced
PCIPnP
[No]
[PCI]
Phoenix-AwardBIOS CMOS Setup Utility
Advanced
Onboard Device Configuration
↑↓ : Select Item
→←: Select Menu
[Auto]
[HD Audio]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
[Current Time]
-/+: Change Value
Enter: Select SubMenu
Select Menu
Item Specific Help
Select Yes if you are
using a Plug and Play
capable operating
system. Select No if
you need the BIOS to
configure non-boot
devices.
Select Menu
Item Specific Help
Press [Enter] to set.
F5: Setup Defaults
F10: Save and Exit
Chapter 4: BIOS setup
Advertisement
Table of Contents
