Asus Rampage II GENE - Republic of Gamers Motherboard User Manual page 151

4.4.4 Intel
®
The Intel Matrix Storage Manager Option ROM utility allows you to create RAID 0,
®
RAID 1, RAID 10 (RAID 0+1), and RAID 5 set(s) from Serial ATA hard disk drives
that are connected to the Serial ATA connectors supported by the Southbridge.
To enter the Intel Matrix Storage Manager option ROM utility:
®
1. Turn on the system.
2. During POST, press <Ctrl+I> to display the utility main menu.
Intel(R) Matrix Storage Manager option ROM v8.0.0.1038 ICH10R wRAID5
Copyright(C) 2003-08 Intel Corporation.
1. Create RAID Volume
2. Delete RAID Volume
RAID Volumes:
None defined.
Physical Disks:
Port Drive Model
0 ST3160812AS
1 ST3160812AS
2 ST3160812AS
3 ST3160812AS
[↑↓]-Select
The navigation keys at the bottom of the screen allow you to move through
the menus and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and
may not exactly match the items on your screen.
The utility supports maximum four hard disk drives for RAID configuration.
ROG Rampage II GENE
Matrix Storage Manager option ROM utility
[ MAIN MENU
[ DISK/VOLUME INFORMATION
Serial #
9LS0HJA4
9LS0F4HL
3LS0JYL8
9LS0BJ5H
[ESC]-Exit
All Rights Reserved.
]
3. Reset Disks to Non-RAID
4. Exit
]
Size Type/Status(Vol ID)
149.0GB Non-RAID Disk
149.0GB Non-RAID Disk
149.0GB Non-RAID Disk
149.0GB Non-RAID Disk
[ENTER]-Select Menu
4-35