Pci Pnp; Lcd Poster And Led Control - Asus Rampage Extreme - Motherboard - ATX User Manual

Legacy USB Support [Auto]
Allows you to enable or disable the support for legacy USB devices. Setting to
[Auto] allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is detected,
the legacy USB support is disabled.
Configuration options: [Disabled] [Enabled] [Auto]
3.5.4

PCI PnP

The PCIPnP menu items allow you to change the advanced settings for PCI/PnP
devices.
Take caution when changing the settings of the PCI PnP menu items. Incorrect
field values can cause the system to malfunction.
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause system to
Plug And Play O/S
Plug And Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set to
[Yes] and if you install a Plug and Play operating system, the operating system
configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
3.5.5

LCD Poster and LED Control

ROG Logo
LCD Poster Backlight
LCD Poster Backlight(S5)
LCD Poster Mode
Voltiminder LED
CPU LED Selection
NB LED Selection
SB LED Selection
Motherboard Light
3-30
BIOS SETUP UTILITY
Advanced
malfunction.
[No]
BIOS SETUP UTILITY
Advanced
[Enabled]
[Turn Off]
[Turn Off]
[Current Time]
[Enabled]
[Vcore]
[NB]
[SB 1.05]
[Turn On]
NO: lets the BIOS
configure all the
devices in the system.
YES: lets the
operating system
configure Plug and Play
(PnP) devices not
required for boot if
your system has a Plug
and Play operating
system.
ROG LED
Chapter 3: BIOS setup