Using The Appliance - CRISTAL WDC1200FWM User Manual

User manual

Hide thumbs

Table Of Contents

Table of Contents

WASHIng&DRYIng

LOADiNg thE MAchiNE

Open the washer door, put in the laundry piece by piece . Close the door tightly .

¬ When first using the Washer Dryer, let it run empty without detergent for one

quick wash cycle to prevent the laundry from being tainted by oil or dirty water

from the Washer Dryer .

¬ Do not overload the Washer Dryer .

SELEctiNg DEtERgENt

The washing efficiency and the performance is determined by the quality of detergent

used . Special non-foaming detergent produces good washing results . Use specific

detergents for synthetic and woollen goods . Do not use dry cleaning agents such as

trichloroethylene and similar products .

Note: Do not add more detergent than needed . Please follow the dosage

recommendation on the detergent package .

ADDiNg DEtERgENt

Slide out the detergent drawer and put the required detergent and softening agent

into the corresponding compartments . Push back the drawer gently . (Refer to the

instructions on the drawer)

caution:

¬ For pre-washing program, detergent should be added to both compartments 1 and

2 . For other programs, do not add detergent to compartment 1 .

¬ If liquid detergent will be used, please fill in to the dosage cup and place it directly

into the drum together with the laundry .

¬ Do not overuse softener; otherwise, it will damage the artificial fibers .

SELEctiNg pROgRAM

To get the best washing results, an appropriate washing program should be selected according

to the laundry type . Please turn the program knob clockwise to select the right program .

SELEctiNg FUNctiONAL

Select the required options . (Refer to the "Control panel" pages 09 and 10) .

Otherwise keep all the buttons deselected . If you wish to dry your laundry directly

after the wash cycle is finished, please press the "Dry"-button .