Canceling A Print Job; Adjusting Toner Darkness; Printing Information Pages - Lexmark MS410 Quick Reference

2
From the Print dialog and pop‑up menus, adjust the settings
if necessary.
Note: To print on a specific paper type, adjust the
paper type setting to match the paper loaded, or select
the appropriate tray or feeder.
3
Click Print.

Adjusting toner darkness

Using the Embedded Web Server
1 Open a Web browser, and then type the printer IP address in the
address field.
Notes:
•
View the printer IP address in the TCP/IP section in the
Network/Ports menu. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to
load the Web page correctly.
2
Click Settings > Print Settings > Quality Menu > Toner Darkness.
3
Adjust the toner darkness setting.
4
Click Submit.
Using the printer settings on the computer
Depending on your operating system, adjust the toner darkness
settings using the Local Printer Settings Utility or Printer Settings.
Using the printer control panel
1 From the printer control panel, navigate to:
> Settings > > Print Settings >
Menu > > Toner Darkness >
2
Adjust the toner darkness.
3
Press .

Printing information pages

Printing a font sample list
From the printer control panel, navigate to either of the following:
> Reports >
or
> Reports >
Fonts >
Printing a menu settings page
Print a menu settings page to review the current menu settings and to
verify if the printer options are installed correctly.
Note: If you have not changed any menu settings, then the menu
settings page lists all the factory default settings. When you select
and save other settings from the menus, they replace the factory
default settings as user default settings. A user default setting
remains in effect until you access the menu again, choose another
value, and save it.
From the printer control panel, navigate to:
> Reports >
Printing a network setup page
If the printer is connected to a network, then print a network setup
page to verify the network connection. This page also provides
important information that aids network printing configuration.
1 From the printer control panel, navigate to:
> Reports >
> Quality
Note: If an optional print server is installed, then Print
Network [x] Setup Page appears.
2
Check the first section of the network setup page and confirm that
the status is Connected.
If the status is Not Connected, then the LAN drop may not be active,
or the network cable may be malfunctioning. Consult your system
support person for a solution, and then print another network
setup page.
> Print Fonts > > PCL Fonts >
> Print Fonts > > PostScript
> Menu Settings Page >
> Network Setup Page >
7

Canceling a print job

Canceling a print job from the printer control
panel
From the printer control panel, press >
Canceling a print job from the computer
For Windows users
1 Open the printers folder.
In Windows 8
From the Search charm, type run, and then navigate to:
Apps list > Run > type control printers > OK
In Windows 7 or earlier
a
Click or click Start, and then click Run.
b
In the Start Search or Run dialog, type control printers.
c
Press Enter, or click OK.
2 Double‑click the printer icon.
3 Select the print job you want to cancel.
4 Click Delete.
For Macintosh users
1
From the Apple menu, navigate to either of the following:
•
System Preferences > Print & Scan > select your printer > Open
Print Queue
• System Preferences > Print & Fax > select your printer > Open
Print Queue
2 From the printer window, select the print job you want to cancel,
and then delete it.
.