HP 6710b - Compaq Business Notebook Maintenance And Service Manual page 83

6. Remove the switch cover (see
7. Remove the fan (see
8. Remove the heat sink (see
Remove the processor:
1. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise
until you hear a click.
2. Lift the processor (2) straight up and remove it.
NOTE: The gold triangle (3) on the processor must be aligned with the triangle (4) embossed on
the processor slot when you install the processor. The illustration below shows the processor
removal steps for the HP Compaq 6715 computer model.
NOTE: The illustration below shows the processor removal steps for the HP Compaq 6710
computer model.
Reverse this procedure to install the processor.
Switch cover on page
Fan on page 71).
Heat sink on page
70).
72).
Component replacement procedures 75