Epson Stylus Photo RX620 Quick Manual page 70

Your image is too dark.
Try adjusting the brightness with your application
software. Also check the brightness and contrast values
of your monitor.
The dark frame around negative film is perceived as
white, altering the exposure of the scan and causing it
to appear darker. Set the correct color by adjusting the
border (marquee) so only your photo is selected. Then
scan again. Click
details.
Change the Display Gamma setting and check the Destination setting in
EPSON Scan. Click
Only part of the photo is scanned.
The scanner has non-readable areas at the edges. Move
your photo in about 1/8 inch from the edges of the
scanner glass.
If you're using Full Auto Mode, try using Home Mode
or Professional Mode in EPSON Scan.
The image does not look the same as the original.
Your image and display settings may not be correct for your document type.
Click
Help
Your monitor and printer use different technologies to represent colors, so
your printed colors can't match your screen colors exactly. Try increasing your
monitor's color palette to view a greater range of colors.
If you've removed the scanner lid to scan a thick document, try covering the
document with a heavy cloth or paper to keep out ambient light.
The scanner doesn't recognize your image type when using Full Auto mode
in EPSON Scan.
Try scanning the image again. If that doesn't work, scan in Home or Professional
mode.
70
Solving Problems
in the EPSON Scan window for
Help
in the EPSON Scan window for details.
Help
in the EPSON Scan window for details.