Maintenance; Customer Responsibilities; Lubrication Before Storage - Craftsman 536.885203 Operator's Manual

ILv_ !'_.! I_IIi :1_!'_.! _[l_l
CUSTOMER RESPONSIBILITIES
SERVICE R ECORDS
Fillindates asyou Before Every Every Every
complete r egular Each 5 10 25 Each Before SERVICE
service. Use Often Hours Hours Hours Season Storage DATES
Change Engine Oit _
Not ............................................
Check Spark Plug ._ ._
Drain Fuel ._
Check Adjustment of
Auger Control Cabte ._
GENERAL RECOMMENDATIONS
The warranty on this snow thrower
does not cover items that have been
subjected to operator abuse or negli-
gence. To receive full value from the
warranty, the operator must maintain
the snow thrower as instructed in this
manual.
Some adjustments will need to be
made periodically to properly maintain
your snow thrower.
_IL ARNING: To prevent acci-
dental starting when making
any adjustments or repairs,
always disconnect the spark plug
wire and place it where it cannot
make contact with the spark plug.
AFTER EACH USE
Run the machine to clear the auger
of snow.
To prevent freezing of the auger or
controls, remove all snow and slush
from the snow thrower.
_ghten any loose fasteners.
Check and maintain the auger.
Check controls to make sure they
are functioning properly.
If any parts are worn or damaged,
replace immediately.
LUBRICATION BEFORE STORAGE
Lubricate chute control
flange, Lubricate flange
with a clinging type
grease such as
Lubriplate.
Figure 8
Check for anyloose or damaged
parts.
F-031049C 15