Fujitsu ScandAll PRO How To Use Manual page 33

7. Click the [OK] button.
To link another button, perform steps
HINT
8. Launch ScandAll PRO.
From the [Start] menu, select [All Programs] [Fujitsu ScandAll PRO] [Fujitsu ScandAll
PRO], and then ScandAll PRO starts up.
9. From the [Tool] menu, select [Preferences].
⇒
The [Setup] dialog box appears.
10. Select the [Event] tab.
11. Click the action of the Event you selected in step 5, and then select a profile from the
list you want to use for scanning.
3.2 Scanning by Pressing the Scan Button on the Scanner
3 to 7 again.
How to use ScandAll PRO
3
27