Changing Copy Settings - Epson 1000 ICS Basics Manual

Changing Copy Settings

You can change Copy settings on the Control Panel as described below.
Scan button
Change the number of copies by pressing the Value buttons.
Choose color or black and white copies by pressing the
To change the print quality: press one of the Menu buttons to select the print
quality menu, then use the Value buttons to select
Economy
To change the paper size: press one of the Menu buttons to select the paper size
menu, then press the Value buttons to select
.
4 6
To reduce or enlarge your image to fit on a smaller or larger size of paper, press
one of the Menu buttons to select
to choose the paper sizes for your source image and copy.
To manually reduce or enlarge your image, press one of the Menu buttons to
select
Zoom In/Out
scanned image for the resulting print.
To lighten or darken your copies, press one of the Menu buttons until you see
Lighter/Darker
To reduce the bottom margin, press one of the Menu buttons until you see
Bottom Margin
Go back to the main menu by pressing the y
Check your settings, then press the x
To clear a setting, press the Clear button. To clear all the setting changes
you've made, press the Clear button and hold it down for at least
3 seconds.
4
Stand-alone Copying
Scan
Clear
Clear all
(3sec.)
Menu buttons
.
, then press the Value buttons to choose a percentage of the
. Press the Value buttons to adjust the setting.
, then press the Value button.
B&W/ Color button
B&W
Copies
Color
Value
Menu
Value buttons
Letter
Reduce/Enlarge
Stop
button to make your copy.
Copy
Copy button
Stop
Copy
Stop button
button.
B&W/Color
, ,
Normal Fine Photo
, ,
Executive Half Letter
, then press the Value buttons
button.
, or
, or