Know Your Snow Thrower; Operation - Craftsman 536.884780 Owner's Manual

OPERATION
KNOW YOUR SNOW THROWER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR SNOW
THROWER. Compare the illustrationswith your snow thrower to familiarize yourself with the locationof various
controls and adjustments.Save this manual for future reference.
AUGER
DRIVE
LEVER
CRANK
ASSEMBLY
KEY
STARTER
CHUTE
DEFLECTOR
DISCHARGE
CHUTE
STARTER
HANi
THRO'I'IrLE CONTROL
FIG. 1
SEARS SNOW THROWERS conform to the safety standards of the American National Standards Institute, B71.3-1984.
AUGER DRIVE LEVER - Starts and stops the auger and
impeller (snow gathering and throwing). The auger
assist in the self propelling.
CRANK ASSEMBLY - Changes the direction of snow
throwing through the dischargechute.
CHUTE DEFLECTOR - Changes the distance the snow
is thrown.
DISCHARGE CHUTE - Changes the direction the sn6w
is thrown.
IGNITION KEY - Must be inserted to start the engine.
ELECTRIC STARTER BUTTON - Used to start the
engine using the 120 V. electric starter.
RECOIL STARTER HANDLE- Starts the engine manu-
ally.
CHOKE CONTROL - Used to start a cold engine.
PRIMER BU'I-I'ON - Injects fuel directty into the carbure-
tor manifold for fast starts in cold weather.
THROTTLE CONTROL - Controls the engine speed.
10