Download Print this page

Craftsman 315.111610 Owner's Manual page 8

3/8 in. two speed / reversible

Advertisement

REVERSIBLE
See Figure 3.
This tool has the feature of being reversible. The
direction of rotation is controlled by a selector located
above the switch trigger. With the drill held in normal
operating position, the direction of rotation selector
should be positioned to the left of the switch for
drilling. The ddlling direction is reversed when the
selector is to the right of the switch. When the selector
is in center position, the switch trigger is locked.
_1
CAUTION: To prevent gear damage, always
allow chuck to come to a completestop before
changing the direction of rotation.
To stop, release switch trigger and allow the chuck to
come to a complete stop.
SELECTOR
REVERSE
TO INSTALL BATTERY PACK
Lock switch triggeron your drillby placing the
direction of rotation selector in center position.
See Figure 3.
Place battery pack in your drill. Align raised db
inside drill with groove on battery pack. See
Figure 5.
BATTERY
PACK
LATCHES
CENTER POSITION
(LOCK)
FORWARD SWITCH
TRIGGER
Fig. 3
CHUCK KEY
See Figure 4.
A chuck key has been provided for use when
installingor removing bits.
CHUCK KEY STORAGE
See Figure 4.
When not in use, the chuck key can be placed in the
storage area located on the front of the battery pack.
CHUCK KEY
PACK
DEPRESS LATCHES
TO RELEASE
BATI'ERYPACK
Fig. 5
Make sure the latches on each side of your
battery pack snap in place and battery pack is
secured in ddll before beginningoperation.
_b. CAUTION: When placing battery pack in your
drill, be sure raised rib inside drill aligns with
groove on battery pack and latches snap in place
properly. Improper assembly of battery pack can
cause damage to internalcomponents.
TO REMOVE BATTERY PACK
Lock switch trigger on your drilr by placing the
direction of rotation selector in center position.
See Figure 3.
Locate latches on end of battery pack and
depress to release battery pack from your drill.
See Figure 5.
Remove battery pack from your drill.
TOREMOVE CHUCK KEYFROMSTORAGE:
PULLOUTWARD (1), THENPULLDOWN(2)
Fig. 4
8

Advertisement

loading