Safe Stain Removal Procedures - Kenmore 970L4802 Use & Care Manual

Stain Removal Guide
Safe Stain Removal Procedures
To reduce the risk of fire or serious injury to persons or
property, comply with the basic warnings listed below:
• Read and comply with all instructions on stain removal
products.
• Keep stain removal products in their original labeled
containers and out of children's reach.
• Thoroughly wash any utensils used.
• Do not combine stain removal products, especially
ammonia and chlorine bleach. Dangerous fumes can
result.
• Never wash items which have been previously cleaned
in, washed in, soaked in or spotted with gasoline, dry
cleaning solvents or other flammable or explosive sub-
stances because the items give off vapors that could
ignite or explode.
• Never use highly flammable solvents, such as gasoline,
inside the home. Vapors can explode on contact with
flames or sparks.
For Successful Stain Removal:
• Treat stains promptly.
• Determine the kind of stain, then follow the recom-
mended treatment in the stain removal chart on the
next page.
• To pretreat stains, use a prewash product, liquid de-
tergent, or a paste made from powder detergent and
water.
• Use cold water on unknown stains as hot water can set
stains.
• Consult care label instructions for treatments to avoid
on specific fabrics.
• Check for colorfastness by testing stain remover prod-
ucts on an inside seam.
• Rinse and wash items after stain removal.
Do not use or mix liquid chlorine bleach with other
household chemicals such as toilet cleaners, rust
removers, acid or products containing ammonia.
These mixtures can produce dangerous fumes which
can cause serious injury or death.
For best results ..........................................
FollOw thefabric care iaBelinstructions
on items to be washed.
]5