Sending A Call; Receiving A Call; Monitoring - Motorola CP040 Basic User's Manual

SENDING A CALL

Turn your radio on.
1
Use the Channel Selector knob to select the
2
desired channel.
Hold the radio in a vertical position, press the
3
PTT, and talk at a distance of about
2.5 to 5 cm from the microphone.
Release the PTT to listen.
4

RECEIVING A CALL

Turn your radio on.
1
Adjust the radio's volume.
2
Switch to the desired channel. To respond,
3
hold the radio in a vertical position, press the
PTT, and talk at a distance of about
2.5 to 5 cm from the microphone.
12
English

MONITORING

It is important to monitor traffic before transmitting to
ensure that you do not "talk over" someone who is
already transmitting.
Press and hold the preprogrammed
1
Monitor button to access channel traffic.
Once channel traffic has cleared, proceed
2
with your call by pressing the PTT button.
A long press of the preprogrammed Monitor
3
button places the radio in Sticky Permanent
Monitor mode.
• You hear a high-pitched tone.
A short press of the Monitor button cancels
Sticky Permanent Monitor mode and returns
the radio to normal operation.