Memory Board - Fujitsu SPARC Enterprise M4000 Overview Manual

FIGURE 1-8
1.3.3

Memory Board

Each memory board provides a memory access controller (MAC) and eight DIMM
slots (
power the server off.
TABLE 1-5
Location
Cold FRU replacement capability
To install DIMMs, you must remove the memory board and open the case of the
memory board. The servers use Double Data Rate II (DDR-II) type memory with the
following features:
Error Checking and Correction (ECC) error protection
■
Recovery from memory chip failures
■
FIGURE 1-9
midrange servers.
CPU Modules in the M5000 Server
and
FIGURE 1-9 FIGURE 1-10
TABLE 1-5
Memory Board Features
and illustrate the location of the memory boards in both
FIGURE 1-10
). To remove or install memory boards, you must
lists the memory board features.
Top of server
Yes
Chapter 1 System Overview 1-13