Replacing The Pick Roller - Fujitsu fi-5120C Operator's Manual

fi-5120C / fi-5220C Image Scanner Operator
Guide

5.3 Replacing the Pick Roller (1)

1. Remove any documents on the ADF Paper Chute.
2. Remove the ADF paper chute.
3. Open the ADF by pulling the ADF Open Lever.
ATTENTION
Be careful, the ADF may close and pinch your finger.
4. Remove the Pick roller from the scanner.
1. Grip the knobs on the sheet guide with your fingers, and lift it up to remove.
2. Rotate the Pick roller bushing in the direction of the arrow.
3. Remove the Pick roller while lifting it up in the direction of the arrow.
2 3
1
Pick Roller Bushing
Pick Roller Shaft
TROUBLE SHOOTING
CONTENTS MAP
TOP
4