Error Indications In Operator Panel; Temporary Errors; Section 2.1 Installing The Scanner] - Fujitsu fi-5120C Operator's Manual

fi-5120C / fi-5220C Image Scanner Operator
Guide
6.2 Error Indications in the Operator Panel (1)
When any error occurrs, the operator panel indicates "U" followed by a number for temporary errors or "E" followed by
a number for device alarms (permanent error). Temporary errors can be resolved by the operator, but the device
alarm requires recovery works by support engineers.
When the Error Recovery Guide is installed on your PC, its window appears when Windows is started up. If any error or
device alarm occurred, this software displays information such as error names and error codes regarding the error/
alarm. Record the information and click [Details] on its window to learn detailed information for trouble shooting.

Temporary Errors :

Indication
U0 Shipping lock error(fi-5220C only)
U1 Paper Feed Error
U2 Multi Feed Error
The ADF has been opened during
U4
scanning.
U6 The print cartridge is not set.(fi-5120C only)
HINT
The Error Recover Guide is stored in Setup CD-ROM. When installing the application
software, refer to "2.1 Installing the Scanner Application" in fi-5120C/fi-5220C Getting
Started.
1
Meaning
1
All Rights Reserved Copyright 2006-2009 © PFU LIMITED
2
Confirm that the shipping lock is released. For
details refer toA[fi-5120C/fi-5220C Getting Start

section 2.1 Installing the Scanner].

Remove the jammed documents. Refer to "
Removing JammedDocuments".
Confirm that the documents meet the paper
conditions for scanning. Refer to
Document Quality".
Close the ADF cover completely. For the
details, refer to "6
This is a temporary error related withthe
Imprinter option (sold separately). For details
refer to 553PR Operator's Guide, chapter "5
Error Message".
2
TROUBLE SHOOTING
CONTENTS MAP
TOP
Remedy
"7.2
TROUBLESHOOTING".
6.1