Installing Tilt Brackets - NEC Video Wall Mount PD02VW MFS 46 55 P Installation And Assembly Manual

Full service video wall mount

Hide thumbs Also See for Video Wall Mount PD02VW MFS 46 55 P:

Attaching Adapter Brackets to Display

Attach adapter brackets (B) to back of display using four M6 x 12 mm socket pin screws (I) with nylon shoulder

washer (H), or four M8 x 15 mm socket pin screws (J) as shown below.

Attaching Adapter Brackets to Display Carriage

Attach adapter brackets (B) to display carriage. Slide adapter brackets (B) into position.

Loosely fasten in place using security screw as shown in detail 1.

NOTE: Once display is located in desired position, tighten security screws using 4mm allen wrench (K) to lock in

place.

I or J

6 of 11

ISSUED: 02-19-13 SHEET #: 145-9018-1

Table of Contents