Chapter 3 Embroidering Procedures
1.
2.
3.
4.
1.
2.
3.
66
Retrieve the Embroidery Data
Click
.
The embroidery data explorer starts up.
Double-click the desired data or click
The selected data is transferred to the machine controller.
Click
.
The data is transferred to the machine for preparation of embroidering.
Start Embroidering
Check that the READY lamp on the machine operation panel is on.
Press
to check the embroidering area.
Press
to start embroidering.
START
BES-960BC BES-1260BC
after clicking the desired data.