Automatic Step Back; Automatic Hoop Feed - Brother BES-1260BC Instruction Manual

Chapter 6 Embroidering
Sets the number of stitches for automatic step back if thread breakage occurs.
1.
2.
3.
Sets automatic hoop feed for a thread breakage.
1.
152

Automatic Step Back

The number of stitches that can be set is from 0 to 255.
Additional step-back can be made for sensitivity value of the thread breakage sensor.
Select [Automatic Step Back] from Settings menu.
Enter the number of stitches for automatic step back.
Click [OK].

Automatic Hoop Feed

Select [Automatic Hoop Feed] from Settings menu and put the check mark
( ).
BES-960BC BES-1260BC
Click here, and the value decreases/increases.
Click here to give additional step-back for the
sensing distance with the thread breakage sensor.