Weekly Maintenance - Brother BES-1240BC Maintenance Manual

9 6 0 , 9
9 6 0 , 9
Website:
Needle Bars
1. Remove the front plate that has the "BROTHER"
logo on it by removing one screw and loosening
the other. The plate will now slide off to the side.
Do this for all the heads.
2. Oil each needle bar as shown in the picture by
placing a small drop of oil on each needle bar in
the two locations. Do this for all the needle bars
on all the heads.
B E S - 9 4
B E S - 9 4
6 1 , 9 6 2 , 9 6
6 1 , 9 6 2 , 9 6
For Technical Assistance Please Call Toll Free 1-877-4BROTHER
Email:
http://www.brother-usa.com/industembroidery/tech_down.aspx

Weekly Maintenance

0 , 9 4 1 , 1 2 4
0 , 9 4 1 , 1 2 4
3 , 1 2 6 0 , 1 2
3 , 1 2 6 0 , 1 2
tsupport@brother.com
Oiling
Thread take up bushing and connecting rod
1. Place 5-6 drops of oil in the channel behind each
head to lubricate the connecting rod. Head has been
removed to show location.
2. Place 1-2 drops on the thread take up bushing on
each head. Head has been removed to show
location.
5/24/05 2
0 , 1 2 4 1
0 , 1 2 4 1
6 1 , 1 2 6 2 , 1
6 1 , 1 2 6 2 , 1
2 6 3
2 6 3