Connecting External Devices - TYAN S7016 User Manual

2.11 – Connecting External Devices
The following diagram will detail the rear port stack for this S7016 motherboard:
LAN3 (IPMI shared NIC)
USB x 2
KB/MS
NOTE: Peripheral devices can be plugged straight into any of these ports but
software may be required to complete the installation.
Onboard LAN LED Color Definition
The three onboard Ethernet ports have green and yellow LEDs to indicate LAN
status. The chart below illustrates the different LED states.
10/100/1000 Mbps LAN Link/Activity LED Scheme
10 Mbps
Active
100 Mbps
Active
1000 Mbps
Active
No Link
Serial Port
Left LED
Link Slow Blinking Green
Blinking Green
Link Slow Blinking Green
Blinking Green
Link Slow Blinking Green
Blinking Green
http://www.tyan.com
VGA Port
Off
33
LAN2 LAN1
Right LED
Off
Off
Green
Green
Orange
Orange
Off