Step2. Upgrade the firmware version 1004.3
1. If you completed Step 1 from above, remove the File and Folder (listed
below) on your USB drive.
File
: P510_P530 firmware 1004.2.exe
Folder : T- CNLAUSC
4. Go to the USB Memory Drive and then double click the file
P510_P530 firmware 1004.3.exe.
5. Press "Unzip" button.
7. After completing, press
"OK" and "Close" button.
2. Save the firmware file onto your computer.
File : P510_P530 firmware 1004.3.exe
3. Connect the USB Memory Drive
to the USB port of your PC.
Copy the file into the USB Memory Drive.
6. Unzipping is in progress.
8. The USB driver should contain one folder
named 'T-CNLAUSC'
9. Safely disconnect the USB memory drive
by right clicking the green check mark
on the taskbar and then left click
"Safely Remove".
6