Onboard Led; Internal Connectors - Asus P8Z77-V LK2 User Manual

1.2.6

Onboard LED

1. Standby Power LED
The motherboard comes with a standby power LED that lights up to indicate that the
system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should
shut down the system and unplug the power cable before removing or plugging in any
motherboard component. The illustration below shows the location of the onboard LED.
P8Z77-V LK2
P8Z77-V LK2 Onboard LED
1.2.7

Internal connectors

1. Serial port connector (10-1 pin COM)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
P8Z77-V LK2
P8Z77-V LK2 Serial port (COM) connector
The COM module is purchased separately.
ASUS P8Z77-V LK2
SB_PWR
ON OFF
Standby Power Powered Off
COM
PIN 1
1-19