Resources; Create Legacy Raid Group; Rebuild Legacy Raid Group - Gigabyte GA-8I955X Royal User Manual

8.2.14 Resources

This command displays the Resource Information window. This feature is for debugging purpose only.

8.2.15 Create Legacy RAID Group

This command displays a dialog box to let user create legacy RAID group. This item is disabled if new RAID groups exist.
User needs to select the following parameters:
RAID Group: Select a group ID from the available ID list
Configuration: Striped (for RAID 0)
Mirrored (for RAID 1)
Capacity: Select from a list of RAID group size, current options are from 256 MB to 100 GB, and MAX.
Chunk Size: Select one from the available list: 8, 16, 32, 64, 128 (KB). RAID 1 set does not require this.
Devices: Select RAID member devices from the available device segment list

8.2.16 Rebuild Legacy RAID Group

This command displays a dialog box to let user choose a replacement segment to rebuild a non-fault tolerant legacy RAID
group.
SATARAID5 User's Manual
43