Networking Problems; Ethernet Problems - Lenovo ThinkStation E31 Hardware Maintenance Manual

The image is discolored
Symptom: The image is discolored.
Action: The monitor might be affected by interference from nearby equipment. Magnetic fields around other
devices, such as transformers, appliances, fluorescent lights, and other monitors might be causing the
problem. Move fluorescent desk lighting or any equipment that produces magnetic fields further away from
the monitor. If this does not correct the problem, do the following:
1. Turn off the monitor. (Moving a color monitor while it is turned on might cause screen discoloration.)
2. Adjust the placement of the monitor and other devices so that they are at least 305 mm (12 inches) apart.
3. Turn on the monitor.
If these actions do not correct the problem, your monitor might need service. See "Additional information
resources" on page 32 for details.

Networking problems

The following are the most common networking problems. Select your networking problem from the
following list:
• "Ethernet problems" on page 45
• "A wireless LAN problem" on page 46
• "A wireless WAN problem" on page 47
• "Bluetooth problems" on page 47
For more information, see "Additional information resources" on page 32.

Ethernet problems

For Ethernet problems, select your symptom from the following list:
• "Your computer cannot connect to the network" on page 45
• "The adapter stops working for no apparent reason" on page 46
• "If your computer is a Gigabit Ethernet model and you use a speed of 1000 Mbps, the connection fails
or errors occur" on page 46
• "If your computer is a Gigabit Ethernet model, it cannot connect to the network at 1000 Mbps. Instead,
it connects at 100 Mbps" on page 46
Your computer cannot connect to the network
Symptom: Your computer cannot connect to the network.
Actions: Make sure that:
• The cable is installed properly.
The network cable must be securely connected to both the Ethernet connector of your computer and
the RJ45 connector of the hub. The maximum allowable distance from the computer to hub is 100
meters. If the cable is connected and the distance is within acceptable limits but the problem persists, try
a different cable.
• The cable is installed properly.
• You are using the correct device driver.
On the Windows 7 operating system, do the following:
1. Click Start ➙ Control Panel.
2. Click Hardware and Sound.
.
Chapter 5 Troubleshooting and diagnostics
45