To install the solid state drive, do the following:
1. Install the solid state drive into the adapter. Then, install the four screws to secure the solid state
drive to the adapter.
Figure 70. Installing the solid state drive into the adapter
2. To install the solid state drive with the adapter into the 3.5-inch hard disk drive bracket, flex the bracket
1
and align pin
, pin
Figure 71. Installing the solid state drive with the adapter into the hard disk drive bracket
3. Connect the signal cable and the power cable to the solid state drive.
4. Install the solid state drive into the desired hard disk drive bay. See "Replacing the hard disk drive" on
page 135.
134
ThinkStation Hardware Maintenance Manual
2
3
4
, pin
, and pin
on the bracket with the corresponding holes in the adapter.