Lenovo ThinkStation E31 Hardware Maintenance Manual page 109

1. Install the solid state drive into the storage converter. Then, install the four screws to secure the solid
state drive to the storage converter.
Figure 32. Installing the solid state drive into the storage converter
2. To install the solid state drive with the storage converter into the 3.5-inch hard disk drive bracket, flex
the bracket and align pin
the storage converter.
Figure 33. Installing the solid state drive with the storage converter into the hard disk drive bracket
3. Connect the signal cable and the power cable to the solid state drive.
4. Install the solid state drive into the desired hard disk drive bay. See "Replacing the primary hard disk
drive" on page 104 or "Replacing the secondary hard disk drive" on page 106.
1 , pin 2 , pin 3 , and pin
.
Chapter 10 Replacing FRUs (for machine types: 2551, 2552, 2553, 2554, and 2555)
4 on the bracket with the corresponding holes in
103