Layer 3 Switch Features - Enterasys VH-8G-L3 User Manual

Vertical horizon gigabit ethernet switch
Table of Contents

Advertisement

8K active MAC address entry table per device with automatic
learning and aging (10 to 9999 seconds).
512 KB packet buffer per device.
Broadcast and Multicast storm filtering.
Supports Port Mirroring.
Supports Port Trunking – up to four trunk groups may be set
up. One trunk group can have from two to eight ports.
802.1D Spanning Tree support.
802.1Q Tagged VLAN support – up to 63 User-defined
VLANs per device (one VLAN is reserved for internal use).
GVRP – (GARP VLAN Registration Protocol, where GARP
represents a Generic Attribute Registration Protocol (GARP),
support for dynamic VLAN registration.
802.1p Priority support with 4 priority queues.
IGMP Snooping support.

Layer 3 Switch Features

Wire speed IP forwarding.
Hardware-based Layer 3 IP switching.
IP packet forwarding rate of 12 Mpps.
2K active IP address entry table per device.
Supports RIP – (Routing Information Protocol) version I and
II.
Supports IP version 4.
IGMP version 1 and 2 support (RFC 1112 and RFC 2236).
IGMP can be globally enabled or disabled for all VLANs.
9
9033705-01

Advertisement

Table of Contents
loading

Table of Contents