Connecting The System; Attaching The Speakers To The Player; Attaching The Rear Speakers To The Wireless Receiver - LG LHB976 Owner's Manual

Connecting the
System
Attaching the speakers to the
player
1. Connect speaker wires to the player.
Each speaker wire is color-coded. Use matching
color wires for corresponding speakers.
Color Speaker
Green Center
Sub
Orange
woofer
Red Front
White Front
2. Connect the speaker wire to the terminal on the
speaker.
Make sure the wire marked black goes in to the
terminal marked "–" (minus) and the other wire
goes in to the terminal marked "+" (plus).
Position
Center
Any front position
Front right
Front left
Attaching the rear speakers to
the wireless receiver
Connect the rear speakers to the wireless receiver
with the speaker cables.
Make sure the wire marked black goes in to the
terminal marked "–" (minus) and the other wire
goes in to the terminal marked "+" (plus).
(+)
About Ferrite Core (for EMI only)
Be sure to attach the ferrite core to the speaker
cable. This ferrite core can reduce noises.
How to attach the ferrite core
1. Press the stopper [a] of the ferrite core to open.
2. Wind the speaker cables once on the ferrite
core.
3. Close the ferrite core until it clicks.
Refer to the fig.3 and comment.
Rear of wireless
receiver
Connecting 19
(-)
The length
here is as
short as
possible.
2