Firmware Specification - Enterasys RoamAbout RBT-1002-EU Release Notes

NOTE: To avoid conflicts with internal RAS VLAN numbering schemes, it is strongly advised to use VLAN IDs
less than 3520 on RBT-8xxx systems that are upgrading from MSS version 6.0 to 7.0. Failure to do so
will result in a loss of configuration data.
NOTE: RoamAbout Wireless Switch Firmware version 5.0.9.2 and greater supports the RBT-8210, the small
form factor switch that replaces the larger RBT-8200. The RBT-8210 uses the RBT-8200 firmware and
commands. The RBT-8210 prompt displays as RBT-8200.
NOTE: If you are using a 4.x firmware image/software, Enterasys recommends that you upgrade the
RoamAbout Switch Manager (RASM) to firmware version 5.0.12.2 BEFORE upgrading your RBT-8xx0
wireless switches to firmware version 5.0.12.2. Please refer to the
section of this release note for more information.
NOTE: If you are upgrading a pre-existing RBT-4102 or RBT-4102-EU model Access Point from 4.1.4 or earlier,
please read the instructions listed in the Firmware Release 4.1.5.0 section of the Firmware Changes
and Enhancements section of the RoamAbout Switch Manager (RASM) 6.2.2.4 Release Notes.
NOTE: RoamAbout Wireless Switch Firmware version 6.0.4.2 and greater replaces the term „DAP‟ with „AP‟.
NOTE: Beginning with the calendar year 2007, please be aware that the United States Daylight saving time
period begins on the second Sunday in March, and ends on the first Sunday in November. Refer to the
"Changing Timezone Properties" section in the "Configuring RoamAbout Switch System and
Administrative Parameters" chapter of the RoamAbout Switch Manager Interface Reference document
for detailed setup instructions.

FIRMWARE SPECIFICATION:

Status
Current Release
Previous Release
Previous Release
Previous Release
Previous Release
Previous Release
Previous Release
Previous Release
Previous Release
Previous Release
Previous Release
Previous Release
Previous Release
Previous Release
Previous Release
Previous Release
1/21/09 P/N: 9038177-27
F0615-O
Version No.
7.0.7.3
7.0.5.6
7.0.4.3
7.0.3.7
6.0.7.2
6.0.6.1
6.0.5.1
6.0.4.4
6.0.4.2 Customer, added TRPZ-MP-620 support
5.0.12.2 Customer, added TRPZ-MP-422 support.
Includes DFS2 Support for North
RBT-1002 Rev 6A (AP ID: AP1002C),
RBT-4102 Rev 6A (AP ID: AP4102C),
RBT-1602 Rev 6A (AP ID: AP1602C)
5.0.11.4
5.0.10.3
5.0.9.3
5.0.9.2
5.0.6.1
4.2.5.1 Customer, added RBT-8110 and
Subject to Change Without Notice
CUSTOMER RELEASE NOTES
Upgrading the RBT8xxx switches
Type
Customer Maintenance
Customer Maintenance
Customer Maintenance
Customer Maintenance
Customer Maintenance
Customer Maintenance
Customer, added
RBT-8500 support
Customer
American Models:
Customer
Customer – Patch
Customer
Customer, added
RBT-8210 support
Customer, added
TRPZ-MXR-2 support
Release Date
January 2009
October 2008
August, 2008
June, 2008
April, 2008
March, 2008
December 2007
October 2007
September 2007
June 2007
April 2007
March 2007
February 2007
January 2007
December 2006
October 2006
Page: 2 of 28