Firmware Specification; Hardware Compatibility - Enterasys Vertical Horizon VH-2402S Release Notes

FIRMWARE SPECIFICATION:

Status
Current Version
Prior Version
Prior Version
Prior Version
Prior Version
Prior Version
Prior Version

HARDWARE COMPATIBILITY:

The ELS100-S24TX2M PHY chip has changed from Rev. 5208 to 5208R. If you are currently using hardware
Rev. "0F" or greater, It is necessary to use firmware version 2.01.04.01 or greater on the ELS100-SMGMT
module.
The VH-SMGMT2 module requires firmware release Version 02.05.02 or later. The version of firmware must be
installed on the module whether the module is used in a VH-2402S2 or a VH-2402S base unit. If the VH-SMGMT
module is used in the VH-2402 base unit it must be running version 02.05.02 or later. No restriction on the
VH-STACK or VH-STACK2 card is required.
BOOTPROM COMPATIBILITY:
ALL
NETWORK MANAGEMENT SOFTWARE SUPPORT:
NMS Platform
NetSight Atlas Console
NetSight Atlas Inventory Manager
If you install this image, you may not have control of all the latest features of this product until the next version(s)
of network management software. Please review the software release notes for your specific network
management platform for details.
4/29/2004 P/N: 9038023-19
F0615-L
Version No.
2.06.06.00 Customer Patch
2.06.05.00 Customer Release
2.05.19 Customer Patch
2.05.09.01 Customer Patch
2.05.09 Customer Patch
2.05.02.42 Customer Patch
2.05.02.31 Customer Patch
Version No.
1.3.0
1.4.0
Subject to Change Without Notice
CUSTOMER RELEASE NOTES
Type Release Date
4/30/2004
12/18/2003
11/21/2003
10/14/2003
5/15/2003
2/21/2003
1/16/2003
Page: 2 of 7