Download Print this page

Craftsman 315.114500 Operator's Manual page 3

3/8 in. cordless drill-driver reversible 7.2 volt / two speed 9.6 volt / variable speed

Advertisement

Yourdrill-driver h asmanyfeatures formaking yourdrilling
operations m orepleasant a ndenjoyable. Safety,
performance anddependability havebeengiventop
priority inthedesignofthisdrill-driver making iteasyto
maintain andoperate.
_i,
WARNING:
Do not attempt to use this product until
you read thoroughly and understand completely the
operator's manual. Pay close attention to the safety
rules including Dangers, Warnings and Cautions. If
you use this product properly and only as intended,
you will enjoy years of safe, reliable service.
,_
WARNING:
Read and understand all instructions.
Failure to follow all instructions listed below, may
result in electric shock, fire and/or serious personal
injury.
SAVE THESE
INSTRUCTIONS
Work Area
Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while
operating a power tool. Distractions can cause you to
lose control.
Electrical
Safety
Do not abuse the cord. Never use the cord to carry
the charger. Keep cord away from heat, oil, sharp
edges, or moving parts. Replace damaged cords
immediately. Damaged cords may create a fire.
A battery operated tool with integral batteries or a
separate battery pack must be recharged only with
the specified charger for the battery. A charger that
may be suitable for one type of battery may create a
risk of fire when used with another battery. Use battery
only with charger listed.
MODEL
315.114500
MODEL
ASSEMBLY
315.114510
BATTERY PACK
CHARGER
Item No. _9 11051
Item No. _911050
(1323423)
(981496-001 )
BATTERY PACK
CHARGING
Item No.-911054
Item No.-9 11053
(1323424)
(1425003)
Use battery operated tool only with specifically
designated battery pack. Use of any other batteries
may create a risk of fire. Use only with battery pack
listed.
Personal
Safety
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use tool while tired or under the influence of
drugs, alcohol, or medication. A moment of inatten-
tion while operating power tools may result in serious
personal injury.
Dress properly. Do not wear loose clothing or
jewelry. Contain long hair. Keep your hair, clothing,
and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
Avoid accidental starting. Be sure switch is in the
locked or off position before inserting battery pack.
Carrying tools with your finger on the switch or inserting
the battery pack into a tool with the switch on, invites
accidents.
Remove adjusting keys or wrenches before turning
the tool on. A wrench or a key that is left attached to a
rotating part of the tool may result in personal injury.
Do not overreach. Keep proper footing and balance
at all times. Proper footing and balance enables better
control of the tool in unexpected situations. Do not use
on a ladder or unstable support.
Use safety equipment.
Always wear eye protection.
Dust mask, nonskid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions.
3

Advertisement

loading

This manual is also suitable for:

315.114510