Statistics Defined - Enterasys 6000 User Manual

To open the board-level Statistics window from the Device View window:
1. Click on the appropriate Module Index to display the Module menu.
2. Drag down to select the appropriate repeater channel (A - H), then right to
3. Select Statistics. The board-level Statistics window will appear.
To access the port-level Statistics window:
1. Click on the appropriate Port to display the port menu.
2. Select Statistics. The port-level Statistics window will appear.
The Module and Port Statistics windows are the same as the Statistics window displayed
in

Statistics Defined

The Statistics window displays the statistical counts accumulated since the Ethernet
MicroLAN module was last reset; the following information is displayed:
Active Users
Displays the number of users (identified by MAC [Ethernet] address) communicating via
a port on the Ethernet MicroLAN module. For an individual port, the number of Active
Users can tell you whether the port is supporting a station or trunk connection.
Repeater Statistics
Figure 5-1. The Repeater Statistics Window
reveal the board-level Repeater menu.
Figure 5-1, except that they display statistics applicable to the module or port.
Managing Ethernet MicroLAN Modules
5-3