Setting The Ups Id; Using The Test Option - Enterasys 6000 User Manual

Line Voltage
Displays the voltage coming through the line attached to the SmartSwitch 6000 or Matrix
E7.
Battery Output
Displays the amount of battery output voltage.
Battery Capacity
Displays the percentage of remaining battery capacity (100% indicates a fully charged
battery).
Test Results
Displays the result of the last self-test performed by the UPS. The possible test results are:
Unit OK
Unit Failed
Bad Battery
No recent test
Unit in test...
Please standby

Setting the UPS ID

You need to set the UPS ID typecode that indicates the manufacturer and model of the
UPS.
To set the UPS ID:
1. Click on the arrow next to the SET UPS ID text box. A Model number menu
2. Click on the OK button. The UPS ID you have chosen will appear in the text
If your UPS unit does not function after you have set this ID, check the manual you
received with the UPS to ensure that you have chosen the correct UPS ID. If you need to
change the ID, follow the directions given above.

Using the Test Option

You can use the test option to activate a self-test cycle for your unit. This self-test will
check the viability of your unit and its battery.
Managing the Module
will appear. Scroll to highlight the appropriate UPS ID. (Consult the manual
that was included when you purchased your UPS for the correct Model ID
number.)
box, and the UPS window will be active.
The UPS unit is in working order.
The UPS unit has failed the self-test. Check the unit
for damage or consult your UPS user's manual.
The UPS unit battery is bad.
No UPS self-test has been performed in the last five
minutes.
The UPS is currently in test mode.
The Device View
2-53