Dimensions - Exmark LAZER Z LZ27KC604 Operator's Manual

Specifications
– Optional suspension seat: molded adjustable
flip-up armrests.
• Seat Safety Switch: Incorporated into the
Safety Interlock System. Time delay seat switch
eliminates rough ground cut-outs.
Hydrostatic Ground Drive System
• Hydrostatic Pumps: Two Hydro Gear variable
displacement piston pumps.
• Wheel Motors: Two Parker with 1 1/4 inch
tapered shafts.
• Hydraulic Oil Type: Use Mobil 1 15W-50
Synthetic motor oil.
• Hydraulic Oil Capacity: 2.1 qt. (2.0 L)
• Hydraulic Filter: Replaceable cartridge type.
– Summer use above 32°F (0°C)
P/N 109-4180: 25 microns, 10 psi bypass
– Winter use below 32°F (0°C)
P/N 1-523541: 40 microns, 18 psi bypass
• Speeds:
– 0–9.8 mph (15.8 km/hr) forward.
– 0-6.3 mph (10.1 km/hr) reverse.
• Drive wheel release valves allow machine to be
moved when engine is not running.
Tires & Wheels
Drive
Pneumatic
(Air-Filled)
Quantity 2
Tread Size "Multi- Trac
C/S"
Size 24 x 12.00-12
Ply Rating 4
Pressure
13 psi (90 kPa)
Cutting Deck
• Cutting Width: 60 inch (152.4 cm)
• Discharge: Side
• Blade Size: (3 ea.) 20.50 inches (52.1 cm)
• Blade Spindles: Solid steel spindles with 1 inch
(25.4 mm) I.D. bearings.
• Deck Drive:
• Deck:
• Deck Depth: 5.5 inches (14.0 cm)
• Cutting Height Adjustment:
• Mulching Kit: Optional.

Dimensions

Overall Width:
Front Caster
Semi-Pneumatic
Without Deck
Deflector Up
2
Deflector Down
Smooth
Overall Length:
13 x 6.50-6
Roll Bar - Up
Roll Bar - Down
16
– Electric clutch mounted on horizontal engine
shaft. "B" Section belt (with self-tensioning
idler) from electric clutch to transfer shaft
mounted on deck.
– Blades are driven by one "B" Section belt
(w/self-tensioning idler) from transfer shaft
on deck to blade spindles.
Full floating deck is attached to out-front support
frame. Six anti-scalp rollers provide maximum
turf protection. Deck design allows for bagging,
mulching or side discharge.
An extra-long cushioned lever is used to adjust
the cutting height from 1 1/2 inch (3.8 cm) to 5
inches (12.7 cm) in 1/4 inch (6.4 mm) increments.
The cutting height adjustment handle has a
transport position and all adjustments can be
made while the operator remains seated. Units
also have a foot operated deck lift assist lever to
aid in raising the deck.
53.5 inches (135.9 cm)
61.4 inches (156.0 cm)
72.2 inches (183.4 cm)
81.9 inches (208.0 cm)
92.6 inches (235.2 cm)