Product Overview; Operation; Controls - Exmark PIONEER S-SERIES Operator's Manual

Operation

Product Overview

Figure 4
1. Rollover Protection
System (ROPS)
2. Engine controls (right
console)
3. Seat belt
4. Fuel cap
5. Motion control levers
6. Parking brake
7. Height of cut adjustment
Operation
Note: Determine the left and right sides of the
machine from the normal operating position.

Controls

Motion Control Levers
The motion control levers located on each side of
the console control the forward and reverse motion
of the machine.
Moving the levers forward or backward turns
the wheel on the same side forward or reverse
respectively. Wheel speed is proportional to the
amount the lever is moved.
Moving the levers outward from the center position
into the T-slot locks them in the neutral position
(Figure 5).
1. Neutral lock position
(handles out)
2. Neutral operate position
(handles in)
3. Front of unit
Choke Control
Located on right console (black lever) (see Figure 6).
The choke is used to aid in starting a cold engine.
Moving the choke lever forward will put the choke in
the "ON" position and moving the choke lever to the
rear, to the detent, will put the choke in the "OFF"
18
Figure 5
4. Forward
5. Neutral (operate)
6. Reverse