Table of Contents
Advertisement
Built-in Commands
soft_reset
Description:
Syntax:
Options:
Example:
stpEdgePort
Description:
Syntax:
Options:
Examples:
11-30
Network Tools Screens
Restarts the software image, which restores the user configuration settings
from NVRAM. The user will be queried to confirm the reset command to
ensure against unwanted resets.
TIP: The Network Tools connection to the device will be terminated
upon execution of this command.
soft_reset
None
->soft_reset
RESET: Are you *SURE* ?
-> Y
Sets a port to EDGE PORT (enable) or BRIDGE PORT (disable).
stpEdgePort [ status ]
stpEdgePort [ enable ] [ vlan id ] [ port range ]
stpEdgePort [ disable ] [ vlan id ] [ port range ]
status — Displays STP edge port status.
enable — Enables one or more ports as STP edge ports.
disable — Disables one or more ports as STP edge ports.
vlan id — Specifies a VLAN ID.
port range — Specifies a range of ports.
-> stpEdgePort enable 1 5
-> stpEdgePort enable 1 5-10
Advertisement
Table of Contents
