EVGA NVIDIA nForce 650i Ultra User Manual page 56

or type in a new value. Note that the
frequency that takes effect on a reboot.
MEM (DDR), MHz
Use the or keys to scroll through new values for the memory frequency
+ –
or type in a new value. Note that the
frequency that takes effect when the system reboots.
Memory Timing Setting
Press Enter to display the Memory Timing Setting menu. Use this menu to
set optimal timings or to manually enter timings.
Phoenix – AwardBIOS CMOS Setup Utility
Parameters
Memory Timing Setting
x tCL (CAS Latency)
x tRDC
x tRP
x tRAS
x Command Per Clock (CDM)
** Advanced Memory Settings **
x tRRD
x tRC
x tWR
x tWTR
x tREF
:Move Enter:Select
F5: Previous Values
Optimal
Use the and
Page Up Page Down
prohibits you from manually setting any timing. All timing is set for
optimal performance.
Actual FSB (QDR)
Actual MEM (DDR)
Memory Timing Setting
Settings Current Value
[Optimal]
Auto(5) 5
Auto(7) 5
Auto(7) 5
Auto(23) 18
Auto(2T) 1T
Auto(4) 3
Auto(28) 22
Auto(7) 5
Auto(10) 9
Auto 6.1uS
+/-/PU/PD:Value F10:Save ESC:Exit
F7:Defaults
keys to select
Optimal.
Hardware Installation
reflects the actual
reflects the actual
Item Help
Main Level
Select [Expert] to
enter timings manually
F1:General Help[
Optimal
45