Trouble Shooting - Eureka 63 Owner's Manual

Trouble Shooting Guide
PROBLEM
Hand vac will not
operate.
Hand vac will not
pickup or suction
power is weak.
Dust escaping from
hand vac.
Hand vac hose or
brushes will not
pickup.
8
POSSIBLE REASON
1. Power cord not firmly
plugged into outlet.
2. No power in wall outlet.
3. Thermostat
1. Dust cup is full.
2. Unit clogged.
3. Dust cup filter needs
cleaning.
1. Dust cup filter needs
cleaning.
2. Dust cup filter is not
installed correctly.
3. Puncture/hole in dust cup
filter.
1. Hose clogged.
2. Dust cup is full.
POSSIBLE SOLUTION
1. Plug unit in firmly.
2. Check fuse or breaker.
Replace fuse/reset
breaker.
3. See page 4, Automatic
Motor Shut-Off.
1. Empty dust cup.
2. Turn unit off and unplug
from wall outlet and
check for object(s)
causing clog and
remove.
3. Clean or replace the
dust cup filter.
1. Empty dust cup and
clean filter.
2. Review dust cup filter
instructions.
3. Replace dust cup filter.
1. Remove hose and/or
brushes. Remove
obstruction from hose.
2. Empty and clean dust
cup and clean dust cup
filter.