Table of Contents
Advertisement
Step 1 Disconnect the hose by depressing the projection in the hole on each side of handle.
Assembling
Step 1 Slide the projection on the hose supporter of the hose into on either side.
5 Trouble Shooting Chart
Trouble
The vacuum cleaner can not
start operation
The suction become smaller
Possible Causes
1.The
plug is not plugged in
2.The power switch didn't open.
3.Internal wiring of loose
4.The motor burned out
1.The channel blocked suction head
2.
Poor ventilation dust bag
3.
Air inlet and outlet filter blocked
4.
Motor problems
1.
The dust suction channel block 1.Clean up the dust absorption
Countermeasure
1.Re plug
2.Press the power switch
3.Re connect the internal wiring
4.Repair or replacement of the
new machine
1.Clean
the suction
head channel
2.Clean up the dust bag
3.Cleaning filter
4.
Repair replacement
the motor
of
Advertisement
Table of Contents
