To Replace Headlight Bulb; Interlocks And Relays; To Replace Fuse; To Remove Hood And Grill - Craftsman 917.255460 Owner's Manual

S RVICE AND ADJUSTM
TO REPLACE HEADLIGHT BULB
- Raise hood.,
= Pull bulb holder out of the hole in the backside of the
grill,,
• Replace bulb in holder and push bulb holder securely
back into the hole in the backside of the grill
• Close hood_
INTERLOCKS AND RELAYS
Loose or damaged wiring may cause your tractor to run
poorly, stop running or prevent it from starting
° Check wiring See electrical wiring diagram in the
Repair Parts section of this manual.
TO REPLACE FUSE
Replace with 30 amp automotive-type plug-in fuse. The
fuse holder is located in the engine compartment, directly
in front of the dash.
TO REMOVE HOOD AND GRILL (See Fig. 33)
• Raise hood_
. Unsnap headlight wire connector_
° Stand in front of tractor'. Grasp hood at sides, tilt
forward and lift off of tractor.
o To reinstall, slide hood pivot brackets into slots in
frame_
° Reconnect headlight wire connector and close hood.
HOOD
HEADLIGHT
WIRE
CONNECTOR
FIG. 33
24