Epson ChromaBlast v1.0 Getting Started Manual page 39

Sawgrass Technologies, Inc.
▬
•
Next, determine what Step Size you want to apply to the Color
Finder palette. This is simply a question of how much you want
your Start Color to fluctuate. If your Start Color is close the color
you are looking for, use a low Step Size (i.e. 5-10). However, if
your start color is not close to what you are looking for, use a
higher Step Size. You can enter any Step Size value between 1
and 40.
As an example, let's say your Start Color is C:20, M:100, Y:150,
K:0 and you select Cyan and Magenta to be your Step Colors.
You also enter a Step Size of 10. When the 'Print Similar Colors
Chart' button is clicked, your Start Color will be in the middle of
the Similar Colors Chart and from there each color will vary the
Cyan and Magenta values by 10.
•
When you are finished selecting the Start Color, Step Colors,
and the Step Size, click on the Print Similar Colors Chart
If you modify your Start Color with three steps, Step
Color 1 will remain the same. However Step Color 2 and
Step Color 3 will form an imaginary 'X' and their values
will change on opposing diagonal Y axes.
Color Finder Palette with three Step Colors
ChromaBlast Getting Started Guide for the EPSON Stylus Pro 4880
™
37