Epson ChromaBlast v1.0 Getting Started Manual page 12

Sawgrass Technologies, Inc.
ChromaBlast Getting Started Guide for the EPSON Stylus Pro 4880
™
1. Ensure the printer power is on. Press the ink compartment cover to
release the latch and open the cover.
2. Raise the ink lever to the unlocked position.
The ink lever is located to the right of each ink
compartment. If you are installing a complete
set of ink cartridges, then install using the
following order starting from left to right:
Black (CB), Cyan (CB), Magenta (CB),
Yellow (CB), Black (CB), Cyan (CB),
Magenta (CB) and Yellow (CB).
Note: The cartridge label should be facing left as the cartridge is inserted
into it's slot.
Continue to step 5 below.
If you are just replacing an empty cartridge, then continue to step 3 and 4
below.
3. Remove the empty ink cartridge from the
printer.
10