Table of Contents
Advertisement
Sawgrass Technologies, Inc.
Setup Instructions – Windows XP / Vista
Product Overview
The ChromaBlast 4880 Driver™ v1.0 is color management software that
has been written as a Windows printer driver. It is designed to work with
Epson ink-jet printers and Sawgrass ChromaBlast
program will install Sawgrass color management software, the Sawgrass
ChromaBlast™ printer driver software, and ColorSure tools and utilities.
Quick Start
1.
Unpack and setup printer as described in the Epson manual.
2.
Install the Epson printer driver and verify printer operation.
3.
Insert the ChromaBlast 4880 Driver™ v1.0 CD into the CD-ROM
drive on the computer and install the ChromaBlast 4880 Driver™
v1.0.
Step By Step Installation
To get started printing as soon as possible, these are the steps
Sawgrass recommends you perform while setting up your sublimation
printer driver software.
1.
Setup the printer according to the Epson instructions.
2.
Install the ChromaBlast inks.
3.
Install the Epson printer driver. According to the Epson user's
manual.
4.
After the Epson driver is installed, check to see which port the
printer is set to:
a.
b.
c.
5.
Insert the ChromaBlast 4880 Driver™ v1.0 CD into your CD-
ROM drive. The installation is self-starting. However, if the
installation does not begin then Click Start, Run. Browse to
your CD-ROM drive and click on PDNTM4880.exe.
18
In XP you can do this by clicking on Start, Printers and Faxes.
For XP with the Classic menu enabled, click Start, Settings,
Printers.
Right click on the Epson printer you just installed and click on
the Properties option.
Select the Ports tab and write down the port the printer is
assigned to. You will use this later in the ChromaBlast 4880
Driver™ v1.0 software installation.
ChromaBlast
Getting Started Guide for the EPSON Stylus Pro 4880
™
™
ink. The installation
Advertisement
Table of Contents
