Download
Share
Print this page
Craftsman 351.216120 Operator's Manual
  1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Saw
  5. 351.216120
  6. Operator's manual
Craftsman 351.216120 Operator's Manual

Craftsman 351.216120 Operator's Manual

16" tilting arm scroll saw with dust collection
Hide thumbs

Advertisement

Available languages

Available languages

Quick Links

Download this manual
Operator's Manual
®
16"
TILTING ARM SCROLL
SAW WITH DUST COLLECTION
Model No.
351.216120
CAUTION:
Read and follow
all Safety Rules and Operating
Instructions
before First Use
of this Product.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.sears.com/craftsman
23561.00 Draft (03/07/05)

Advertisement

loading

Related Manuals for Craftsman 351.216120

Summary of Contents for Craftsman 351.216120

  • Page 1 16" TILTING ARM SCROLL SAW WITH DUST COLLECTION Model No. 351.216120 CAUTION: Read and follow all Safety Rules and Operating Instructions before First Use of this Product. Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.sears.com/craftsman 23561.00 Draft (03/07/05)
  • Page 2 • Be alert and think clearly. Never operate power tools when tired, intoxicated or when taking medications that cause drowsiness. Warranty ........Safety Rules....... PREPARE WORK AREA FOR JOB Unpacking ........• Keep work area clean. Cluttered work areas invite Assembly .........

  • Page 3: Dust Chute

    • Never stand on tool. Serious injury could occur if tool IMPORTANT: Table is coated with a protectant. To is tipped or if blade is unintentionally contacted. ensure proper fit and operation, remove coating. Coating is easily removed with mild solvents, such as •...

  • Page 4: Power Source

    INSTALL DUST COLLECTION Check with a qualified electrician if grounding instruc- tions are not understood or if in doubt as to whether the Dust collection system consists of a 30-micron bag and tool is properly grounded. clamp. This tool is equipped with an approved 3 conductor •...

  • Page 5: Extension Cords

    • Always make sure that large workpieces are com- Refer to Figures 8 - 17, pages 6-8. pletely supported. The Craftsman 16" Tilting Arm Scroll Saw features alu- • Make sure that arm tilting handle is locked before minum frame construction, built-in dust collection and a...
  • Page 6 • Never s tartsawwithworkpiece t ouching the blade. • Always stopsawbefore removing scrappieces from thetable. • Useextracaution whencuttinground workpieces andworkpieces t hathaveanirregular c ross section. OPERATING CONTROLS ADJUSTMENTS Refer to Figure 8. ON/OFF Switch The ON/OFF switch is located on the right side of the front panel of the saw.

  • Page 7: Installing And Removing

    Tilting The Arm Refer to Figures 12 and 13. The arm of the scroll saw can be tilted from 0 to 45 ° to Blade Guard the left by loosening the arm locking handle counter- clockwise, tilting the arm to desired angle, and tighten- ing the arm locking handle clockwise.
  • Page 8 • Insertnewbladeintothelowerholder f irstandthen • Characteristics which make blades different are intotheupperholder(seeFigures 16and17). width, thickness and pitch. BLADE WIDTH • Width of blade describes distance from tip of a tooth to back of blade. • Width of blade will affect rigidity of blade. A wider blade will wander less and produce a straighter cut.

  • Page 9: Replacing Belts

    • Loosen set screw in shaft coupler (Fig. 20, Key Nos. 21 and 22). • Remove four bolts and vari-speed pulley assembly WARNING: Make certain that unit is disconnected (Fig. 19, Key Nos. 12 and 15). from power source before attempting to service or •...
  • Page 10 CORRECTIVE ACTION SYMPTOM POSSIBLE CAUSE(S) 1. Material not secure on table Excessive blade breakage 1. Hold workpiece firmly; make sure holddown foot is in contact with top of workpiece. 2. Blade too coarse for material 2. Use finer pitch blade 3.
  • Page 11 Service Record Craftsman 16" Tilting Arm Scroll Saw with Dust Collection DATE MAINTENANCE PERFORMED REPLACEMENT PARTS REQUIRED...
  • Page 12 Model 351.21 6120 Figure 19 - Replacement Parts Illustration for Base li38. ,¢//_...
  • Page 13 PART NO. DESCRIPTION QTY. STD863510 5-0.8 x 10mm Pan Head Screw* 22016.00 Spacer 22017.00 Knob STD870512 5-0.8 x 12mm Socket Head Bolt* 16080.00 Switch 22018.00 Front Panel 22019.00 Dust Boot 08567.00 6-1.0 x 12mm Flat Head Screw 22021.00 Spacer 22022.00 Gear with Label 20565.00 Vari-speed Belt...
  • Page 14 Model 351.21 6120 Figure 20 - Replacement Parts Illustration for Arm...
  • Page 15 DESCRIPTION PART NO. QTY. DESCRIPTION QTY. PART 22012.00 Blade Guard 21987.00 17T Pulley 22013.00 STD863408 4-0.7 x 8mm Pan Head Screw* Holddown Assembly 21992.00 Cover with Switch (Incl. Key Nos. 3-7 and 43) 22010.00 5-0.8 x 50mm Pan Head Screw 21993.00 Cover STD851105...
  • Page 16 SIERRA DE CALAR CON OPERADOR DEBE ESTAR PREPARADO PARA BRAZO INCLINABLE DE 16" EL TRABAJO • Use ropa apropiada. No use ropa holgada, guantes, Y RECOLECTOR DE POLVO corbatas, anillos, pulseras ni otras joyas que puedan atascarse en las piezas moviles de la m&quina.
  • Page 17 ELOPERADOR D EBE SABERCOMO USAR pueden deteriorar estos acabados. Use agua y jabon en la LAHERRAMIENTA pintura y en los componentes de pl&stico o goma. Despues • Uselaherramienta correcta p ara cada trabajo. Nofuerce de limpiarla, cubra todas las superficies de met&lico expues- laherramienta...
  • Page 18 INSTALAClON DEL CANAL PARA POLVO Hertzios ........Fase ........Monof&sico • Deslice el canal para polvo sobre el alojamiento del venti- lador. Fijelo en posici6n con el tornillo (vease la Figura RPM ......... 1725 FUENTE DE ALIMENTAClON El motor ha side disefiado para funcionar al voltaje y frecuencia...
  • Page 19 Consulte las Figuras 8-17 en las p&ginas 20-22. La Sierra de Calar con Brazo Inclinable de 16" de Craftsman Muchos de los tornillos de la plancha de cubierta, las tuberias de agua y las cajas de tomacorriente no estan debidamente...
  • Page 20 PRECAUClON: REGLAS DE SEGURIDAD PARA SIERRAS Cambie las velocidades solo mientras DE CALAR m&quina este funcionando. ADVERTENCIA: Para su propia seguridad, lea todas Indicador de Velocidad instrucciones y precauciones antes de operar la herramienta. Indica la velocidad de la hoja de la sierra en carreras ADVERTENClA: El funcionamiento...
  • Page 21 Interruptor Figura 10- Interruptor de la Luz de Trabajo Figura 13 - Brazo Inclinado a 30 ° desde la Posici6n Vertical Almacenamiento de las Hojas de Sierra de la Herramienta El brazo de la sierra de calar puede inclinarse de 0 a 45 ° Consulte la Figura hacia la izquierda...
  • Page 22 La cIavija de la hoja de la sierra se engancha en esta hoja del sujetador Figura 15 - Palanca de Fijacion y Liberacibn de la Figura 17 - Sujetador Superior de la Hoja de la Sierra Hoja de la Sierra VELOClDADES DE LA HOJA...
  • Page 23 TIPO DE CORTE REEMPLAZO DE LAS CORREAS • El corte de contorno se hace guiando la pieza de trabajo Consulte las Figuras 18, 19 y 20. a mano Iibre para producir las formas curvas. • Extraiga el tornillo, la arandela y la perilia de control •...
  • Page 24 • Extraiga el buje y la placa de cojinetes (Fig. 18, Referencias G y H). • Afloje y extraiga cuatro pernos y la placa frontal (Fig. 18, Referencias I y J). Tenga cuidado de no cambiar posicion de la varilla. •...
  • Page 25 MEDIDA CORRECTIVA SINTOMA CAUSA(S) POSIBLE(S) Las hojas se rompen 1. El material no est& seguro en la mesa 1. Sujete firmemente la pieza de trabajo; asegQrese excesivamente que el pie de sujecion este en contacto con la parte superior de la pieza de trabajo 2.
  • Page 26 Registro de Servicios Sierra de Calar con Brazo Inclinable de 16" y Recolector de Polvo de Craftsman FECHA MANTENIMIENTO REALIZADO PARTES DE REPUESTO NECESARIAS...
  • Page 27 NOTAS...
  • Page 28 ® Registered Trademark Trademark Service Mark of Sears, Roebuck and Co. ® Marca Registrada / TM Marca de F_brica / s_ Marea de Servicio de Sears, Roebuck and Co. MC Marque de commerce Marque d_pos_e de Sears, Roebuck and Co. ©...