Operation - Craftsman 315.115780 Operator's Manual

A
WARNING: Do not allow familiarity with tools to
make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious
injury.
A
WARNING: Always wear safety goggles or safety
glasses with side shields when operating tools.
Failure to do so could result in objects being thrown
into your eyes, resulting in possible serious injury.
APPLICATIONS
You may use this tool for the following purposes:
[] Cutting all types of wood products (lumber, plywood,
paneling)
[] Cross Cutting/Rip Cutting
[] Bevel Cutting
[] Pocket Cutting
INSTALLING BATTERY PACK
See Figure 5.
[] Place battery pack in the saw. Align raised rib on bat-
tery pack with groove inside saw, then slide battery
pack in saw.
[] Make sure the latches on each side of the battery pack
snap into place and battery pack is secured in saw
before beginning operation.
CAUTION: When placing battery pack in the saw,
be sure raised rib on battery pack aligns with groove
inside saw and latches snap into place properly.
Improper assembly can cause damage to saw and
battery pack.
/
BATTERYPACK
LATCHES
Fig. 5
REMOVING BATTERY PACK
See Figure 6.
[] Locate latches on side of battery pack and depress to
release battery pack from the saw.
[] Remove battery pack from the saw.
TO
REMOVE
DEPRESS LATCHES TO
BATTERY
TO
INSTALL LATCHES
BATTERYPACK
Fig. 6
12