Changing The Temperature - Carrier Comfort Touch-n-Go Owner's Manual

Changing the temperature
There are times when you want to change the temperature.
Here's how.
1. Open the door. °l_le
2. Press the up or down buttons on the right side until you o_o
reach the desired temperature setting. This creates a "tern- o o
porary hold" until the next pre-set time period. You will ooo o
see temporary hoM on the display. (To switch from the
cooling temperature to the heating temperature - or vice
versa - press the mode button on the left until the word
heat or cool is flashing.)
,,]l ito
3. To maintain that temperature setting so it doesn't change ©_O
during the next pre-set time period, press the hold/run o o
button on the left side. The display will show hold. The ooo o
temperature will stay at the setting you selected until you
release the hold.
4. To return the temperature to the pre-set level for that time °l_lo
period, press hold/run. This releases the hold and the tern- ®_°
perature will return to its programmed level, o ©
5. Close the door. o o o o