Holding The Temperature - Carrier edge Performance TP PHP01 A Series Owner's Manual

QUICK START

Holding the temperature

Here's how to override your programmed temperature settings and hold the
temperature at a specific setting without the temperature changing during the next
programmed period.
1. Open the door.
2. Press the schedule button at the top. The arrow will
move to the word hold under the button.
3. The screen displays the set temperature in the lower right.
To change that temperature, press the up or down button
on the right. The temperature will stay at the setting you
selected until you release the hold.
4. To change the heating temperature when the cooling
temperature is displayed – and vice versa – press the
mode button at the top of the screen until the arrow
moves to your choice – heat or cool. Then press the up
or down button on the right to reach your desired tem-
perature setting.
5. To return the temperature to the pre- - set level for that
time period, press the mode button until the arrow
moves to follow schedule.
6. Close the door.
14